Modern and heavy trucks today are all equipped with built-in pull, tow and lift fixation points. To prevent damage to the trucks during towage or salvage work, truck manufacturers always provide a manual on how and with which fixation means must be used to transport the truck safely and without damage due to salvage work to the desired location.
KingTow’s tow and recovery system makes it possible to transport and winch trucks. KingTow’s truck towing system is specifically designed for use in the truck manufacturer’s built-in pull, tow and lift fixation points. Under certain circumstances it is also possible to lift or hoist the truck to a limited extent. A condition is, of course, that the towage and recovery system is used correctly so that overloading of the system and damage to the truck is prevented. This professional towing and recovery system should not be missing from the equipment of recovery trucks of salvage companies that are active in the field of truck recovery.
Working safely with the KingTow Towing and Recovery System
A big plus of the KingTow towing and recovery system is that, thanks to the simple and unambiguous way of working with this set, safety is also guaranteed. An additional advantage of the towing and recovery system is that, in addition to the safety-increasing character of the set, this set also saves a lot of time during tow or salvage work.
It is of course important that the pull, tow and lift connection points installed by the truck manufacturer are checked before use to ensure that they are in good condition. Only if that is the case, the towage and recovery system can be used completely safely.
The KingTow towing and recovery system can be used in several ways:
- winches with cables
- have it followed behind the recovery truck
- lift and tow with a recovery vehicle
- hoisting or lifting with a crane
Equipment KingTow Towing and Recovery System
The standard equipment of the KingTow towing and recovery system consists of 25 parts. This makes this recovery system suitable for all heavy modern trucks. Almost all modern heavy trucks have two built-in pull, tow and lift points to which the towing and recovery system can be attached. The adapters are available in different versions because they are adapted to the type or brand of truck. All adapters indicate for which brand or type of vehicle they are suitable.
Nr. 1 Lifting Bracketl (120×120, 112×104, etc.)
Nr. 2 Brace
Nr. 3 Adapterholder close
Nr. 4 Adapterholder open
Nr. 5 Lifting adapter SCANIA
Nr. 6 Lifting adapter DAF XF 106
Nr. 7 Adapter DAF CF
Nr. 8 Adapter SCANIA New Gen
Nr. 10 Adapter DAF XF 105
Nr. 11 Adapter MAN, Mercedes, Renault
Nr. 12 Adapter Volvo – old
Nr. 13 Adapter Volvo – new
Nr. 14 Fork wrench 75
Nr. 15 Fork wrench 55
A KingTow Towing and Recovery System is suitable for the following truck brands:
Installation of towing and recovery system in a recovery truck
You can make working with the KingTow tow and recovery system even easier by building a tailor-made storage system in your recovery truck. You can then store all the adapters of the set in an organized manner. This is not only useful during recovery work, but also during inspection and/or cleaning work after a recovery job. KingTow recovery trucks are equipped with a custom-made storage system as standard.
Buy a KingTow Towing and Recovery System
The KingTow Towing and Recovery System is suitable for all modern recovery systems of recovery vehicles such as: Bro, Vulcan, Miller, Empl, Omars, Brechtel, Falkom, Boniface and other brands. Do you want to buy a KingTow Towing and Recovery System? Would you still be in doubt whether this set is suitable and/or if it fits your recovery truck or recovery work? Ask the recovery specialists at KingTow Trucks.